Botnia Maxi Brake
Die Botnia Mündungsbremse in der MAXI Größe ist eine beliebte Option bei europäischen PRS Schützen. Durch die breite Bauweise steht mehr geometrische Fläche zur Verfügung, mit der Gase geleitet werden können.
Wir haben die Bremsen in der Ausführung für Nennkaliber bi 7mm in der grauen Standardoberfläche mit Gewinde 5/8-24 und M18x1 entweder lagernd oder nachbestellt im Zulauf.
Core performance principles
Low ground-blast angles for reduced dust signature and improved shooter comfort
Controlled gas exit design for smooth impulse and stable recoil
Long, directional channels that produce a tight, linear gas line — instead of the wide, expanding cones seen in conventional brakes
Upward-facing ports that apply downward force without introducing disruptive vibration or imbalance
This results in a clear, undisturbed view through the scope during recoil, allowing for better tracking and faster follow-up shots.
Caliber Compatibility
Our Gen 1 Series muzzle brakes are built around three bore sizes to match bullet diameters safely and effectively:
5.56–7mm (.223–.284) Brake
Supports bullet diameters up to 7mm (.284 inches)
Internal bore: 8mm (.314)
7.62–8.6mm (.308–.338) Brake
Supports bullet diameters from 7.62mm (.30 cal) to 8.6mm (.338 cal)
Internal bore: 10mm (.400)
Can be used with smaller calibers as well, but depending on the cartridge, performance may be slightly reduced due to increased bore clearance (approximately 1–4%).
9.5–10.6mm (.375–.416) Brake
Supports bullet diameters from 9.5mm (.375 cal) to 10.6mm (.416 cal)
Internal bore: 11.5–12mm (.452–.472)
Designed for large-caliber magnum cartridges where greater projectile diameter and gas volume require additional bore clearance for safe operation.
Muzzle Brake Cleaning
Here’s our guidance for safely removing carbon fouling from your muzzle brake:
Recommended for Cerakote-Coated Versions
Use Bore Tech C4 or other firearm-specific carbon removers like:
Slip 2000 Carbon Killer
M-Pro 7 Cleaner
Works well in ultrasonic cleaners
These products:
Are designed for carbon, not mineral deposits
Are 100% safe on Cerakote
Pose no corrosion risk when used correctly
Recommended for Stainless Steel (SS) Versions
We recommend CLR for cleaning our raw stainless steel (SS) muzzle brakes:
Works well in ultrasonic cleaners
Effective against baked-on carbon and residue
Be sure to rinse thoroughly and oil afterward
Important: Do not use CLR on Cerakote-finished brakes – it may dull or damage the coating over time due to its acidic nature.
BOTNIA SOLUTIONS
Botnia Solutions is a company founded by competition shooters, for shooters. Our mission is simple: to provide you with the best equipment available. As shooters ourselves, we understand that excellence comes from experience and innovation. That’s why every product we sell is carefully selected or designed to meet the demands of real-world shooting enthusiasts.
